Concrete Mix

Specially formulated blend of Portland cement, sand and gravel. Use for thickness of 2" or greater and maximum strength and workability.

Uses: Patios, foundations, steps, pools, decks supports, driveways, footing bases and...

40 lbs  60 lbs  80 lbs  90 lbs  Bags

Mortar Mix

Specially formulated blend of Portland cement, lime or fire clay and fine sand.. Meets or exceeds strength requirements of ASTM C-387 for Type N mortar when used as directed.

Uses: Lay Brick, Tuck Pointing, Repair Chimneys, Set Blocks or stone, Stuccoing, Patching, Stone Work.

60 lbs  80 lbs  Bags

Sand Mix

Specially formulated blend of Portland cement and sand. For thickness of 1" to 2". Use for maximum strength and workability.

Uses: Concrete Floor Topping, Fill Cracks, Repairing Walls, Repair Floors, Parging, Stuccoing, Grouting, Filling Tree Cavities, Laying Flagstones & Paving Brick.

60 lbs  80 lbs  Bags

Fast Setting Concrete

Specially formulated blend of Portland cement, aggregates and admixtures. Use where a fast setting time and/or high strength is desired. Pour the dry mix into the post hole and soak with water.

50 lbs. Bags

Fiber-Reinforced
Concrete Mix

Specially formulated blend of Portland cement, sand, gravel and thousands of synthetic fibers. Achieves a 3,500 psi compressive strength per ASTM C-387.

Benefits include: Eliminates the need for wire mesh in some Slab-in-Grade applications. Designed to minimize Cracking. Reduces Cracking caused by Drying Shrinkage.

60 lbs. Bags

Super 5000 Concrete Mix

High strength 5000 psi performance blend of Portland cement, sand and gravel- contractor grade formula- ideal for use where a thickness of 2" or greater is required. Use for maximum strength and workability. Exceeds ASTM C-387.

Uses: Setting Posts; Sidewalks; Footings; Patios; Deck Supports; Steps; Curb; Concrete Floors.

60 lbs. 80 lbs. Bags

Surface Bonding Cement

A blend of cementitious material, fiberglass fibers and proprietary ingredients.

Uses: Insulation Board Coating, Dry Stacked Block Construction, Decorative Coatings, Patching Masonry & Stucco.

50 lbs. Bags

Type "S" Masonry
Mortar Mix

A contractor grade mortar mix designed to lay brick, set block, patching, tuck point and stone work. Exceeds ASTM C270.

60 lbs. 80 lbs. Bags

Vinyl Concrete

Scientifically formulated blend of Portland Cement, graded sand, vinyl polymer and other ingredients for patching and resurfacing concrete and masonry. Can be troweled on horizontal or vertical surfaces.

Product features include: Superior Bonding Strength, May be Feather Edged, Use Outdoors or Indoors.

5 lb  10 lb  50 lb  Plastic Pails
40 lb Bags

Non-Shrink Grout

A scientific blend of non-ferrous admixtures, graded sand and Portland cement. A high strength, general purpose grout for most construction applications at any consistency-drypack, plastic or flowable. Meets Corps. of Engineers spec. CRD C-621 and ASTM C-109.

40 lbs. Bags

Stop Leak (Hydraulic) Cement

A specially formulated blend of cement and other ingredients designed to stop the flow of water through cracks and holes in concrete and masonry. Sets in minutes even under water. All ingredients are thoroughly pre-mixed.

Simply add water.

5 lb. 10 lb. 50 lb. Plastic Pails

Anchor Cement

Scientifically formulated blend of cement and other ingredients that expands as it sets. Use either a trowel or pourable consistency indoors or outdoors.

5lb. 10 lb. 50 lb.  Plastic Pails

Black Top Patch

A ready-to-use mixture of asphalt and graded aggregates for repair of blacktop surfaces. No mixing required.

50 lb. Bags

Concrete Crack Filler

A flexible, ready-to-use gray colored crack filler to repair cracks up to 1/2 inch wide in concrete surfaces. Repairs are fast, easy and self-leveling.

1 qt. 1 gal Plastic Containers

Quick Set Cement

A scientifically formulated blend of cement, silica sand and other ingredients for fast setting repair of concrete and masonry surfaces.

Ready for use in four hours.

5 lb. 10 lb. 50 lb. Plastic Pails